Water Proofing ServicesWATER PROFFING WORK ON R.C.C TANK & SLAB, PODIUM AREA,SWIMMING POOL.
The Surface to be painted has to be free from any loose dust particles, Grease, or any old Flaking paints. If any, has to be Removed thoroughly by manual or mechanical tools. Any Growth of Fungus or algae has to be Removed by wire brush Followed by Water Cleaning. Water leakages/see pages from nahani traps, lofts, chajjas etc. has to be repaired thoroughly well before applying. MAX CRACK FILLER is highly polymer modified high tensile and high shear improved white powder for crack free repairing of masonry cracks and patch work. Innovated formula to control cracking in repaired area. Mark the masonry crack and cut in ¿¿¿V groove approx. 1cm wide at both the side. By using mechanical tools. Open the crack up to 10 to 15 mm depth to fill. Remove free parts of bricks or mortar mix from the groove if any. Wash the groove with plenty of water confirming its complete clean. Use primer bonding agent in complete groove if recommended considering site situation and crack size. Mix crack filler and water in ratio of 3:1 or 3.5 :1 as per weather and site needs. Mix thoroughly to obtain smooth paste. Wet the crack with clean water. Let the paste stand for 10 minutes for chemical action while wet crack become little dry. Feel the paste in crack with trowel with pressure in to as deep a possible. Finish upper area with flat trowel. Clean surrounding area with wet cotton cloth after 60 minutes.